Chinese continuous mill installation 

 In the normal life cycle of equipment, provided the original supplier to ensure that the ZP19, 33 presses the impeller, hand wheels, shutters, filter powder board, roller cover, smoke powder, mouth, depending on the frame, up and down the red dust cover, column piece filter cartridge, (parts cost) to ensure proper use of equipment. 
 ??? Equipment over a period of normal use, proper maintenance charge for the parties on the basis of the original guarantee to provide the ZP19, 33 presses the impeller, hand wheels, shutters, filter powder board, roller cover, pink mouth suction , depending on the frame, up and down the red dust cover, bar piece filter cartridge to ensure proper use of equipment. 

 Chinese continuous mill installed: 
 1? Machine should choose relatively smooth, easy to use local installation. 
 2? Work should be processed before the selection of materials clean, are not allowed to have metal objects, stones and other hard substances mixed with machine cents, to avoid damage to parts or machine failure. 
 3? Start of the parts should be checked before it solid and reliable. Everything is normal, before work. 
 4? Power, idling for 1-2 minutes, checking operation is normal, everything is normal only after the feeding. Machine work, the operator can not leave in the event of unusual sounds, immediately disconnect the power. In the processing of raw materials, the discharge port to use longer fasten a cloth bag, clean the discharge port out of the material, to maintain smooth flow of the discharge port to prevent clogging boring car. 
 5, if the machine in use encounter Do not use power supply voltage is too low, so as not to damage the motor. When the supply voltage normal use, the machine is not easy to damage, production efficiency is also high. ? 
 6,? Machines in use, when there is too loud, it may damage the bearing should be replaced immediately 

 1, Installation: Place the machine stable, installed machine feet, pad level, so that machinery can operate freely. 
 2, before the first use of fuel to be added at a good oil, then no-load operation, check all fasteners are loose, if the normal electrical, machinery is working properly and, if abnormal, refurbishment and commissioning. 
 3, will go to feeding the mouth above, open the feed cover for feeding, feeding quantity can not exceed the specified volume, then close all feeding cover, start the machine to operate, the way such as abnormal, must be down to check. 
 4, after work or replacement species must hopper inside and outside clean 
 http://www.czrisheng.com Eyewash 

 http://www.tjsgucheng.com Stainless Steel Products 
 http://www.nhw100.com Pharmaceutical Machinery Pharmaceutical Equipment Chemical Equipment 

 http://www.hncwgl.com plate and frame filter bag filter bag filter more 

 http://www.lihongcn.com pillow packing machine vacuum packing machine 

 http://www.lihongcn.com/baozhuangji6.html screw packaging machine 

 http://www.ghgmp.net/ Eyewash 

 http://www.wz7s.com/ centrifugal mill colloid mill 
 http://www.wz7s.com/ProductShow1760.html rotor pump 
 http://www.wz7s.com/ProductShow1398.html emulsifier 
 http://www.wz7s.com/ProductShow1753.html MC Pump 
 http://www.wz7s.com/ProductShow1758.html colloid pump